+86 574 27831295.
Zuhause » Wissen » Wissen » Welche Arten von Workbenches gibt es?

Welche Arten von Workbenches gibt es?

Anzahl Durchsuchen:0     Autor:Site Editor     veröffentlichen Zeit: 2022-04-07      Herkunft:Powered

erkundigen

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Workbenches werden auch als Operationstabellen bezeichnet. Im Allgemeinen kann die Workbench gemäß den Kriterien der Tischplatte, des Trags und der Funktion aufgeteilt werden. Da es Unterschiede in der Arbeit gibt und somit an verschiedene Arbeitsplätze anpassen, ist dasWerkbankTischplatten sind anders, und es gibt jetzt über folgende Arten von beliebten Tischplatten auf dem Markt.


Hier ist die Inhaltsliste:

  • Zusammengesetzte Arbeitsplatte

  • Multi-Layer-Arbeitsplatte

  • Dünne Eisen-Platten-Arbeitsplatte

  • Thick iron plate countertop

  • Anti-static countertop

  • Fireproof board countertop

  • Integrated wood countertop

  • Stainless steel-clad surface

13 Stück Heavy Duty Garage Workbench-System für Garage Lagerung

Composite countertop

This kind of panel is made of a high-density composite panel, and the surface phenomenon is 2MM thick polymer material. This point of the panel is characterized by oil resistance, wear resistance, acid and alkali resistance, strong impact resistance. The table surface is surrounded by high-strength plastic sealing edge, strong and practical, not easy to smooth bad off. Mostly used for a light workbench and heavy workbench is the standard configuration of theWerkbankIndustrie.


Multi-layer countertop

The tabletop is made of imported hardwood, hot-pressed with high performance waterproof and heat resistant phenolic resin glue, with high bonding strength and high elastic modulus, and can resist corrosion for a long time. The panel is characterized by a flat surface, strong stability, high bearing capacity, and good impact resistance.


Thin iron plate countertop

The tabletop is made of a high-density composite board with a 1.5mm thick iron plate cladding on the surface. The panel is characterized by good strength, impact resistance, wear-resistance and durability, long service life, mostly used for heavy workbench.


Thick iron plate countertop

The table surface is made of a high-density composite board with 5mm thick iron plate cladding. The panel is characterized by good strength, impact resistance, wear-resistance and durability, long service life, and can be assembled with a bench vise. It is mostly used for heavy-duty clamp tables and maintenance tables.


Anti-static countertop

Countertops are generally made of anti-static melamine high-pressure decorative laminate (commonly known as anti-static fireboard) as the surface material and wood materials composite. Wooden material is generally particle board, through the embedded conductive body such as steel column, and then grounded through the grounding wire, so that the desktop electrostatic charge through the wire to the earth smoothly, suitable for electrostatic have high requirements of the work. Mostly used in electronics and anti-static needs of the workbench.


Fireproof board countertop

The tabletop of this kind of workbench is the fireproof board. Features are light, beautiful, wear-resistant, fireproof, can effectively fire, reduce the occurrence of safety accidents, to protect your investment. It is mostly used for the lightWerkbankof electronic products.


Integrated wood countertop

The tabletop is made of imported beech wood base and domestic hardwood base. Characterized by strong load-bearing capacity, the good impact resistance can be assembled bench vise. Mostly used for clamp assembly workbench.


Stainless steel-clad surface

Die Tischfläche besteht aus einer Verbundplatte mit hoher Dichte mit 1,5 mm dicker Edelstahlverkleidung. Merkmale sind wunderschön, guter Festigkeit, verschleißfest, dauerhafter, saurer und alkalischem Widerstand. Meist verwendet für leichte und schwere Verpackung und Testbench.


Willkommen, um https://www.kinboxtools.com/ zu besuchen, um mehr über die Workbench-Produkte unseres Unternehmens zu erfahren.


Ningbo Kinbox Tools Technology Co., Ltd. wurde 2013 gegründet, spezialisiert auf die Verarbeitung von Eisen- und Blechprodukten. Im Laufe der Jahre ist es gewachsen, um eine moderne und dynamische Industrie zu werden ...

Schnelle Links

PRODUKTKATEGORIE

KONTAKTIERE UNS

EMALI:info@kinboxtools.com

Tel: + 86-574-27831295 28831288

Fax: + 86-574-27831296

Hinzufügen: Nr.1588 Jiangnaner Straße, Ningbo 315040, China.

ABONNIEREN

Copyright © 2021 Ningbo Kinbox Tools Technology Co., Ltd. Alle Rechte vorbehalten.浙 ICP 备 2021005823 号 -1Technologie von leadong